Follow us :

HIGH TEMP RTV CLEAR SILICONE GASKET MAKER 85g

sourcesuntide

publisherAlex

time2012/07/17

RTV CLEAR SILICONE GASKET MAKER 85g

1)Type: silicone gasket maker for car care

2)Place of origin: Guangdong,China

3) Brand name: Suntide

4)Item No.: S1-J5

5)Capacity:85g

6) Use: Car care and car maintenance

7)Package: 144pcs/ctn

8)MOQ: 10000pcs

9)Delivery date: 30days after deposit

.

1.Product Description
The product is a RTV & high temperature resistance siliocne rubber sealant , which is specially used in manufacture & repair of auto & machinery.

2.Product Characteristic
Withstand temperature up to 650F(34C)
The surface drying time is 10-20 mintues

Suitable for all vehicles & make any gasket instantly
Low volatile & valve covers
Intake manifold
Oil pump flanger
Transmission
Water pump

3.Packing
32gm alum blister tube , 12pcs/box , 12box/carton

4.Carton Size: 44.0 x 24.0 x 44.0 (cm)

Main Feature

Make Any Gasket Instantly

For All Vehicles

Low Volatile

Valve Covers

Intake Manifold

Oil Pump Flanger

Transmission

Water Pump

Type: Neutral , Acetate

Packing:85gm alum tube, 12pcs/box, 12box/carton

Carton Size: 52x 26x43cm

silicone gasket maker can make any gasket instantly, After curing, it resists cracking, shrinking & migration caused by thermal cycling. it can work up to 280o C ,good resistance of oil, water, anti-freeze and transmission fluid. So it's widely used to seal timing chain covers & other different covers.


User's Guide:
1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease;
2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size;
3. Apply continuous, uniform 1~6mm bead around perimeter of one surface. Completely surround all bolt holes;
4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5. Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.


Notes:
A) Leave thickness for gasket when reassembling. Don't over-tighten the bolts.
B) Sealant releases acetic acid (vinegar-like odor). Use with adequate ventilation.
C) Replace the cap after use